Large Simple Rectangle Table or Table with Chairs + Add-on Benches - Tung Oil Finish - Everyday Line - 42" x 28"

Crafted with Camden Rose's signature rounded, flowing edges which encourage a nurturing environment for your child to develop and flourish in. Our Large Rectangle Table has soft curves and a clean 'simple' design that is timeless. Sized to fit our Everyday Child's Chair or our Everyday Child Height Bench (with the use of child height table legs). Looks great accessorizing any play space.

Available as a table only option or table with two Everyday Child's Chairs. Add-on our Everyday bench or bench with back for additional seating as well!

Simple assembly too! Children's version estimated for children ages 3-12 years old. When they have outgrown that height, you can also convert to adult height legs! (sold separately).

• Dimensions:
  • Table: 42" L x 28" W x 24" H
  • Chair: 14" L x 13-3/4" W x 28" H - Seat height 14 3/8"
  • Bench: 36" L x 14" W x 14.25" H
  • Bench w/Back: 36" L x 14" W x 24" H
• Material: Cherry Hardwood with Maple Accents (skirt, legs)
• Finish: Semi-hard Tung oil finish (water resistant)
• Made In USA
• Simple assembly required, tool included.
  

• Locate the table top, 4 table legs, 4 hex bolts, and the Allen wrench.
• Lay the tabletop face down on a flat surface.
• Insert a hex bolt through the countersunk (larger) hole in one table leg and align the leg with the corner slot on the tabletop.
• Use the Allen wrench to tighten the bolt until the table leg is firm against the table. Do not tighten all the way until the last step.
• Repeat the above steps for the remaining three table legs.
• Finish the table by tightening all four bolts that secure the table legs, in even increments to the tabletop with the Allen wrench.

• Locate the bench top, 4 legs, 4 hex bolts, and the Allen wrench.
• Lay the bench face down on a flat surface.
• Insert a hex bolt through the countersunk (larger) hole in one bench leg and align the leg with the corner slot on the bench.
• Use the Allen wrench to tighten the bolt until the leg is firm against the bench. Do not tighten all the way until the last step.
• Repeat the above steps for the remaining three legs.
• Finish the bench by tightening all four bolts that secure the legs, in even increments to the bench with the Allen wrench.
  
• Directions below for bench with back:
  • Locate bench back and 4 small hex bolts
  • Position bench in its normal upright orientation
  • Hold the back up to bench and insert bolts into holes
  • Use the Allen wrench to tighten the bolt until the back is firm against the bench. Do not tighten all the way until the every bolt is in position.